Make A Skull Candle Holder

31st October 2017 by Dramamask

In this video, a skull is casted from plaster of Paris and a candle with a dripping effect is added to the casted skull. A hole is drilled into the top to fit a tea light candle with the finished model emulating a dripping candle over a skull. A suitable prop for this time of the year – Halloween, plus a dark piece of decor for all year round.

The model created in this video is built in view of making a latex mold, to cast further reproductions in concrete. the model will be used as the template or pattern to make the latex mold. How to make the model and a paint effects example are shown in this video. You can find out how to make a latex mold on the Dramamask Evolution channel.

If you enjoyed this video, please like and share. 🙂

Any comments, please post below. 🙂

Subscribe at: www.youtube.com/dramamask2011
Website: www.dramamaskevolution.com
Facebook: www.facebook.com/dramamaskevolution
Twitter: www.twitter.com/dramamask
Ebay: www.ebay.co.uk/usr/dramamaskevolution
Etsy: www.etsy.com/uk/shop/DramamaskEvolution

For molding and casting enthusiasts, please visit: www.diymolds.com

Music by Angel Rust

Related videos:
Make & Sculpt A Wood Stump Tea Light Candle Holder: https://youtu.be/6yocuNhUmFg
Cast A Concrete Tea Light Candle Holder: https://youtu.be/nIbzX78evyk
Make & Sculpt A Celtic Plaque: https://youtu.be/irwl__pX11Q
Make A Gargoyle | Sculpting | Molding | Casting | Painting Effects | Full Series: https://youtu.be/e3qu–QknLI
Make A Hand Lifecast With Alginate & Plaster Of Paris: https://youtu.be/g5HmOXGA82E
Make A Concrete Leaf: https://youtu.be/xmlXV_dqFUI

[amazon_link asins=’B00HHRJW2G’ template=’ProductCarousel’ store=’dramamaskwordpress-21′ marketplace=’UK’ link_id=’4671ab11-be68-11e7-9bc4-87894709416c’]

Slush Cast A Resin Mask

25th August 2017 by Dramamask

In this video a resin cast of a lioness mask is created from using a silicone mold which is molded from an original mask sculpture by Dramamask Evolution. The original lioness mask is sculpted in clay via the video link here on this channel: Make A Lioness Mask: https://youtu.be/O6YpPR-emn4

Slush casting or hand rotocasting is the method used to build up layers of resin inside the mold cavity.

If you enjoyed this video, please like and share. 🙂

Any comments, please post below. 🙂

For molding and casting enthusiasts, please visit: www.diymolds.com

Music by Angel Rust

Related videos:
Cast A Concrete Tea Light Candle Holder: https://youtu.be/nIbzX78evyk
Make & Sculpt A Celtic Plaque: https://youtu.be/irwl__pX11Q
Make A Gargoyle | Sculpting | Molding | Casting | Painting Effects | Full Series: https://youtu.be/e3qu–QknLI
Make A Hand Lifecast With Alginate & Plaster Of Paris: https://youtu.be/g5HmOXGA82E
Make A Concrete Leaf: https://youtu.be/xmlXV_dqFUI

Products & materials used in this video:
Sony CX240E Full HD Camcorder – Black: http://amzn.to/2t539ls
Nikon D5300 Digital SLR Camera – Black (24.2 MP, AF-P 18-55VR Lens Kit) 3-Inch LCD Screen: http://amzn.to/2t54ngv
Polycraft EasyFlo 120 Polyurethane Liquid Plastic Rotocasting Resin 4 Litre Kit: http://amzn.to/2wE81Ua

Art, Sculpture, Illustration & Design

5th August 2017 by Dramamask

A selection of artwork, sculptures, casts, illustrations and designs created with a variety of media, including, acrylic & oil paints, clay, plaster of Paris, concrete, digital media and more…

If you enjoyed this video, please like and share. 🙂

Any comments, please post below. 🙂

For molding and casting enthusiasts, please visit: www.diymolds.com

Music by Angel Rust

Products & materials used in this video:
Sony DSCW800 Digital Compact Camera (20.1 MP, 5x Optical Zoom) – Black: http://amzn.to/2tZqAhe
Sony CX240E Full HD Camcorder – Black: http://amzn.to/2t539ls
Nikon D5300 Digital SLR Camera – Black (24.2 MP, AF-P 18-55VR Lens Kit) 3-Inch LCD Screen: http://amzn.to/2t54ngv
Mouldmaster 5 Kg Plaster of Paris, White: http://amzn.to/2tZ40W1
Chiltern Arts 8 Tubes Of Assorted Colour Acrylic Paint – 120ml Tubes: http://amzn.to/2tYKpXW

Make A Wood Stump Tea Light Candle Holder

18th July 2017 by Dramamask

Make a wood stump tea light candle holder using plaster of Paris for the carving template. Also in this video, a paint job is applied to the model sculpture tea light holder to demonstrate paint effects and to seal the finished model/sculpture ready for latex molding, to create reproduction casts.

If you enjoyed this video, please like and share. 🙂

Any comments, please post below. 🙂

Subscribe at: www.youtube.com/dramamask2011
Website: www.dramamaskevolution.com
Facebook: www.facebook.com/dramamaskevolution
Twitter: www.twitter.com/dramamask

For molding and casting enthusiasts, please visit: www.diymolds.com

Music by Angel Rust

Create A Gargoyle | Sculpting | Molding | Casting | Painting Effects | Full Series

20th April 2017 by Dramamask

Create A Gargoyle. Full series video featuring sculpting the gargoyle from clay, molding the clay gargoyle with latex, building the mother mold, casting the gargoyle with concrete and painting the concrete gargoyle cast.
——————————————————————————————————-
Part One:
Make & Sculpt A Gargoyle – Clay Sculpture.
Make and sculpt a gargoyle from water based clay. Showing parts and segments of the process sculpting and shaping a gargoyle from clay. Using items and tools, such as basic sculpting tools, and paintbrushes to create an effective sculpture of a gargoyle.

Part Two:
Make A Two Piece Plaster Mother Mold.
The latex mold for the gargoyle sculpture is being prepared in this part for the mother mold. The creation of the mother mold making process is shown to prepare for the next stage, which will be shown in the following part, to be ready for casting in concrete.

Part Three:
Cast A Concrete Gargoyle.
Cast the concrete gargoyle using a latex mold and plaster mother mold. Fill the latex mold with concrete from the pre-made molded gargoyle sculpture.
This part shows the casting process of how to cast the gargoyle in concrete which follows on from sculpting the gargoyle with clay and making the latex mold, plus the mother mold.
Concrete recipe: 2 parts sand to 1 part cement, squirt of washing up liquid/dish soap, concrete bonder and nylon fibres/polyfibres ( I forgot to mention the fibres in the video and you will need to add the fibres or similar aggregate to strengthen the mix. Plus mix in water, of course. 🙂

Part Four:
Paint A Concrete Gargoyle.
This part shows the stages of painting a concrete gargoyle using acrylic paints. A dry brush technique is used to build up layers of paint to create paint effects. The gargoyle was molded and casted in concrete from the original sculpture by Dramamask Evolution.
Colours used: black, white, brown (burnt umber), green (sap green), and yellow (cadmium yellow).
——————————————————————————————————-
If you enjoyed this video, please like and share. 🙂
——————————————————————————————————-
For molding and casting enthusiasts, please visit: www.diymolds.com
——————————————————————————————————-
Music by Angel Rust.
——————————————————————————————————-
Thank you for watching! 🙂

Make A Hand Lifecast Bookend

20th April 2017 by Dramamask

This video shows how to make a hand lifecast bookend model or prototype to use for a latex mold for casting further casts from concrete. The hand is made with using alginate and you can see how to make a hand lifecast in this video on the Dramamask Evolution channel – video link: https://youtu.be/g5HmOXGA82E

The hand lifecast, casted from plaster of paris, is embedded into a plaster of Paris panel or slab and the book end model is created using the techniques in this video.

The model cast is created to make the shape ready for latex molding and subsequent casts from the latex mold. When the mold is created, future casts will be casted using concrete for a substantial bookend which will be ready for practical use. A video showing the molding and casting process for the book end will be shown in a future video. In this video, the model is made and a painting effect shown ready for the molding process.
——————————————————————————————-
If you enjoyed this video, please like and share. 🙂
——————————————————————————————-
Subscribe at: www.youtube.com/dramamask2011
Website: www.dramamaskevolution.com
——————————————————————————————-
Popular Videos:
Make A Planter: https://youtu.be/9s88-LHEl5Q
Paint A Concrete Leaf – Natural Blue Style: https://youtu.be/FeL_eocnIFs
Make A Concrete Leaf: https://youtu.be/xmlXV_dqFUI
Make & Sculpt A Lioness Mask: https://youtu.be/O6YpPR-emn4
Make & Sculpt A Gargoyle: https://youtu.be/fFGPgrlnj8Y
Tattoo Design: https://youtu.be/fpa83c4H10w
——————————————————————————————-
Thank you for watching! 🙂
——————————————————————————————-
Music by Angel Rust.

Make A Lioness Mask

15th February 2017 by Dramamask

Make A Lioness Mask

Make a lioness mask using clay. A mannequin head is used for a template to make and create the lioness mask, by sculpting the clay onto the mannequin head. The mannequin template gives the shape of a face to fit onto a human face, while sculpting the lioness design into the clay. The mannequin head was casted from concrete and molded from a regular polystyrene mannequin head which are easily available from shops or online at Ebay, etc. In this YouTube video, the process of making the mask from clay is shown from start to finish, showing results which can be achieved using this particular process. The mask has been sculpted, in view of making molds for future cast productions using materials such as resin, concrete, plaster of Paris and so on. At this stage the sculpture is ready for molding and will be molded in materials such as liquid latex, silicone, or any molding material which is best suited for this particular type of mask sculpture.

If you enjoyed this video, please like and share. 🙂

Subscribe to this channel at: www.youtube.com/dramamask2011
Website: www.dramamaskevolution.com

For casting and molding enthusiasts, please visit: www.diymolds.com

Thank you for watching! 🙂

Music by Angel Rust.

Make & Sculpt A Gargoyle

15th February 2017 by Dramamask

Make & Sculpt A Gargoyle

Make & Sculpt A Gargoyle – Clay Sculpture.

Make and sculpt a gargoyle from water based clay. Showing parts and segments of a process sculpting and shaping a gargoyle from clay. Using items and tools, such as basic sculpting tools, and paintbrushes to create an effective sculpture of a gargoyle.

If you enjoyed this video, please like and share. 🙂

Subscribe at: www.youtube.com/dramamask2011
Website: www.dramamaskevolution.com

For molding and casting enthusiasts, please visit www.diymolds.com

Thank you for watching! 🙂

Make A Celtic Plaque

15th February 2017 by Dramamask

Make A Celtic Plaque

Make a Celtic plaque using plaster of Paris. Make a plaster of Paris tile, as shown in the star sign plaque video: https://youtu.be/t2AYlxeOnxI and use the plaster of Paris tile to engrave a Celtic design into the plaster of Paris plaque. Once finished, the plaque is ready for molding and casting with concrete, or other materials.

If you enjoyed this video, please like and share. 🙂

Subscribe at: www.youtube.com/dramamask2011
Website: www.dramamaskevolution.com

For molding and casting enthusiasts, please visit www.diymolds.com

Thank you for watching! 🙂

Make A Hand Life Cast With Alginate & Plaster Of Paris

15th February 2017 by Dramamask

Make A Hand Life Cast With Alginate & Plaster Of Paris

Make a hand lifecast using alginate as the molding material and plaster of Paris as the casting agent.

This video shows mixing up the alginate to create a mold for a real life hand which is then casted using plaster of Paris. The plaster of Paris is poured into the alginate mold to create a realistic and life-like hand cast.

If you enjoyed this video, please like and share. 🙂

Subscribe at: www.youtube.com/dramamask2011
Website: www.dramamaskevolution.com

For molding and casting enthusiasts, please visit www.diymolds.com

Thank you for watching! 🙂